Fuel Oil Lubrication Oil Marine Gear Pump
Features
NHG Serial Gear pump is a kind of positive displacement pump, that to transfer liquid by changing of working volume between the pump casing and meshing gears. Two enclosed chambers are formed by two gears, pump casing and front and rear covers. When the gears rotate, the chamber volume on the gear engaged side increases from small to large, forming a vacuum and sucking the liquid, and the chamber volume on the gear meshed side decreases from large to small, squeezing the liquid into the discharge pipeline.
Gear form: Adopt advanced circular tooth gear, which provides the pump with the characteristic of smoothly-running, low-noise, long-life and high-efficiency. Bearing: Internal bearing. So the pump should be used for transfer lubricating liquid. Shaft seal: Include mechanical seal and packing seal. Safety valve：Safety valve infinite reflux design pressure must be less than 132% of working pressure. In principle, the opening pressure of safety valve is equal to the working pressure of pump plus 0.02MPa.
Performance range
Medium: It is used for transport lubricate and fuel oil etc.
viscosity range from 5~1000cSt.
Temperature: Working temperature should be lower than 60℃,
Max. Temperature is 80℃.
Rated capacity: Capacity (m3/h) when outlet pressure is
0.6MPa and viscosity is 25.8cSt.
Pressure: Maximum working pressure is 0.6 MPa at the
continuous operation.
Rotational speed: The design speed of the pump is 1200r/min
(60Hz) or 1000r/min (50Hz). The speed of 1800r/min (60Hz) or
1500r/min (50Hz) can also be chosen when safety valve infinite
reflux pressure is not strictly limited.
Range of application
NHG pumps can be used in the transformation of any lubricating liquid without any caustic impurity and the liquid that not chemically erode the component of the pumps. For example, lubricating oil, mineral oil, synthetic hydraulic fluid and natural oil can be transferred by them. And other special lubricating medium such as light fuel, reduced fuel oil, coal oil, , viscose and emulsion can also be transferred by the pumps. It is widely used in the ship, power plant and other industries.
