Products
-
Fuel Oil Lubrication Oil Marine Gear Pump
NHGH series circular arc gear pump is suitable for conveying no solid particles and fibers, the temperature is not higher than 120℃, in the oil transmission system can be used as a transmission, booster pump; In the fuel system can be used as conveying, pressurizing, injection fuel transfer pump; In the hydraulic transmission system can be used as hydraulic pump to provide hydraulic power; In all industrial fields, it can be used as lubricating oil pump and lubricating oil conveying pump.
-
Fuel Oil Lubrication Oil Marine Gear Pump
Gear form: Adopt advanced circular tooth gear, which provides the pump with the characteristic of smoothly-running, low-noise, long-life and high-efficiency. Bearing: Internal bearing. So the pump should be used for transfer lubricating liquid. Shaft seal: Include mechanical seal and packing seal. Safety valve：Safety valve infinite reflux design pressure must be less than 132% of working pressure. In principle, the opening pressure of safety valve is equal to the working pressure of pump plus 0.02MPa.
-
Bilge water liquid mud sludge pump
system with different capacity.
It has a steady capacity and the lowest pulsation shear.
It has a high efficiency, long service life, low abrasive, few parts, convenient for maintenance and replacement, lowest cost for maintenance.
-
Bilge Water Liquid Mud Sludge Pump
The driving spindle through universal coupling make the rotor running planetary around the center of stator, stator-rotor are meshed continuously and formed closed cavity which have the constant volume and make uniform axial motion, then the medium transferred from suction side to discharge side passing through the stator-rotor without stir and damage.
-
Bilge Water Liquid Mud Sludge Pump
When the driving shaft causes the rotor in planetary motion by the universal coupling, between the stator and the rotor, being in mesh continually, formed many spaces. As these spaces unchanged in volume are axial moving, the medium handle is to transmit to the outlet port from the inlet port. The liquids transmit to get not confused of disruptive, thus it is most suitable for liftting mediums containing solid matter, abrasive particles and viscous liquids.
-
HW serial Welding Twin Screw pump HW serial Casting pump case Twin Screw pump
Owing to the separate structure of the insert and pump casing, it is not required to move the pump out of the pipeline for repairing or replacing the insert, which makes maintenance and repair easy and at a low cost.
The cast insert can be made of various materials so as to meet the need of different medium.
-
MW serial Multiphase Twin Screw pump
Traditional methods of pumping crude oil with gas is being replaced by multiphase pump, a more effective method, compared to traditional methods, multiphase Twin Screw pump does not require separating oil, water and gas from the crude oil, n ot require several pipes for liquids and gas, n ot require compressor and oil transfer pump. Multiphase Twin Screw pump has been developed basing on the ordinary Twin Screw pump, the principle of multiphase Twin screw pump is similar to the ordinary, but its designing and condiguration is special, multiphase Twin Screw pump transfer the multiphase flow of oil, water and gas, Multiphasse Twin Screw pump is the pivotal equipment in the multiphase system. It could reduced pressure of well head, improve the output of crude oil, it not only reduce the coast of base construction, but also implifys the procedure of mining technology, improve the life of oil well, HW multiphase Twin Screw pump can be used in not only oil field on land and sea but also fringe oil field. The max, capacity can reach 2000 m3/h, and the differential pressure 5 MPa, GVF 98%.
-
Crude Oil Fuel Oil Cargo Palm Oil Pitch Asphalt Bitumen Mineral Resin Twin Screw Pump
great influence on the shaft seal, bearing life, noise and vibration of the pump. The shaft strength can be guaranteed by heat treatment and machining.
The screw is the main part of twin screw pump. The size of the screw pitch may determine the pump
-
Crude Oil Fuel Oil Cargo Palm Oil Pitch Asphalt Bitumen Mineral Resin Twin Screw Pump
Adopted the external bearing which lubricated individually, so can deliver various non-lubrication medium.
Adopted synchronous gear, there is no metallic contact between rotating parts, there is no dangerous even dry running in a short time.
-
Fuel Oil Lubrication Oil High Pressure Triple Screw Pump
The performance parameter and reliability of three screw pumps depend a greatly extent on the machining accuracy of manufacturing devices. Shuangjin pump has got leading manufacturing level of the whole industry in china and advanced machining methods.
-
Fuel Oil Lubrication Oil Horizontal Triple Screw Pump
SNH Serial Triple Screw pump is produced under Allweiler licence. Tripe screw pump is a rotor positive displacement pump, it is the use of screw meshing principle, rely on the rotating screw in the pump sleeve mutual meshing, the transmission medium is closed in the meshing cavity, along the screw axis to continuously uniform push to the discharge outlet, to provide stable pressure for the system. Three screw pump is suitable for conveying all kinds of non-corrosive oil and similar oil and lubricating liquid. The viscosity range of the conveying liquid is generally 3.0 ~ 760mm2/S (1.2 ~ 100°E), and the high viscosity medium can be transported by heating and viscosity reduction. Its temperature is generally not more than 150℃
-
Fuel Oil Lubrication Oil Horizontal Triple Screw Pump
Three screw pump is a kind of rotary displacement pump. Its operating principle could be described as follows: Consecutive separate hermetic spaces are formed by accurately fit of a pump casing and three parallel screws in mesh. When driving screw rotates, medium is absorbed into the hermetic spaces. The hermetic spaces make an axial movement continuously and equably as the driving screw moves. In this way, fluid is carried from suction side to delivery side, and the pressure is lift in the whole process